It is currently Tue Nov 19, 2019 2:00 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 23 posts ] 
Author Message
PostPosted: Wed May 14, 2008 10:14 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
Hi, Folks, thought I'd post about the progress of the mirror cell I'm making for my 16" Royce conical primary.

Because the mirror is perforated, and supported by a central post, I figured this would be a great opportunity to try something different: not a true dobsonian mount, but a "split ring altazimuth". The advantage of this is that it can pass right through the zenith without a need to rotate the mount all the way around. It might be a tracking advantage at some point.

This allows a mirror cell with symmetry, instead of the dobsonian sling-supported mirror. In addition, I wanted to be able to collimate from the front, while keeping the center of gravity (and the elevation of the eyepiece) as low as possible.

What came out of this was a triangular cell with support arms outside of the edge of the mirror, sweeping upwards to approximately the plane of the mirror front at the suspension points. It has a wooden core, covered and sealed with multiple layers of fiberglass cloth and epoxy.

The beginnings were humble enough:

Image

Just a single slab of 23/32" plywood.


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:15 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
From there, I cut a series of triangles:

Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:17 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
I sanded each one into shape as carefully as I could (although I overdid it just a little), and began stacking them.
Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:19 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
Finally, after using a bit of epoxy and glass bubble filler to smooth out some of the worst of the rough spots,, I had the wood core ready for fiberglassing.
Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:21 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
I cut individual strips of fiberglass cloth, and put them into place before applying liquid epoxy to them.

Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:23 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
The fiberglass coating stiffened the structure up significantly, but not enough. I decided to add braces.

Image

I used 1/8" oak plywood for those -- primarily because I had some on hand.


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:25 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
A few more strategically placed layers of fiberglass, and the core structure is complete. I HOPE it's stiff enough!

Image

The bracing did make a big difference.


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:27 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
For the center post, I'm taking a bit of a risk. I'm using PVC pipe, a smaller diameter nested inside a larger diameter, sealed with glass-fiber-reinforced epoxy. The material itself is soft, but I believe the nested tubes will make it plenty stiff and strong.

Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:30 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
I put together a "lathe", of sorts -- a rotary tool with a spherical grinding bit clamped to the table. I used that to cut O-ring grooves in the PVC.

Image

(The tool was my "bonus" for 15 years at my current job. Better than a poke in the eye, I guess!)


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:32 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
When the pvc was properly grooved and tested, I epoxied it to the center of the mirror cell core.

Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:34 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
Finally, I did a fit test with the mirror, just to make sure the wasn't any serious mismatch in the design and construction. Looks good so far!

Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 14, 2008 10:35 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
Like so many of my other projects, I'm learning as I go, and my ambition is kind of out-reaching my skill level. It looks ugly, but I think it's going to work.


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 16, 2008 8:30 am 
Offline
Site Admin
User avatar

Joined: Tue Feb 12, 2008 4:58 pm
Posts: 12616
Location: Off Grid in Paradise... Mag 7 skies
Looks great, Dave! Very unique design! :)

_________________
-Erik Wilcox
Homebuilt 16" Truss Dob
8" Antares f/5 Newt
SV 80mm ED Nighthawk NG on M1 ALT/AZ
Nikon Prostaff 65mm spotter on Trekpod
Konusvue 20x80 binos/Peterson PipeMount


"Newt Gingrich is what stupid people think smart people sound like."
-The Great Paul Krugman

Evolution is both fact and theory. Creationism is neither. -Anonymous


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 26, 2008 4:11 pm 
Offline
molecule
User avatar

Joined: Sun Feb 17, 2008 7:02 pm
Posts: 166
Location: Oregon
So paint it black, it will look awesome!

Nice job, Dave.

_________________
If Stupidity got us into this mess, then why can't it get us out?
Will Rogers


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 26, 2008 10:14 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
It's painted black now, Tom, and all the holes are drilled and the o-rings are installed. I'll be taking an "after" photo in the next day or so. Right now I'm building a cover for the mirror, so that I can store the mirror and the cell together.

I'm still not completely convinced that the assembly is stiff enough, but I'm going to try it as is. I have some ideas for further stiffening modifications should they be required.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jun 01, 2008 8:25 pm 
Offline
molecule

Joined: Thu Mar 13, 2008 7:37 pm
Posts: 86
Not sure if the little blue pill will help - but I'm willing see you give it try. :razz:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 30, 2008 6:55 pm 
Offline
Velocepedist
User avatar

Joined: Tue Mar 18, 2008 6:28 pm
Posts: 6683
Location: In search of the ultimate switchbacks and single tracks
Dave, how's the project coming. You must be getting close a complete scope, no?

_________________
Jason® (Admin...and spoke-folk)
Image
Image
Image
Image
Veritable Imagery
Single ride personal records: Distance-76.7miles, Max Speed-50.4mph, Max sustained speed (20miles) 19.5mph
“Life is like riding a bicycle. To keep your balance, you must keep moving.” ― Albert Einstein


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 30, 2008 8:04 pm 
Offline
Site Admin
User avatar

Joined: Tue Feb 12, 2008 4:58 pm
Posts: 12616
Location: Off Grid in Paradise... Mag 7 skies
Yes, please, Dave- an update!!!

_________________
-Erik Wilcox
Homebuilt 16" Truss Dob
8" Antares f/5 Newt
SV 80mm ED Nighthawk NG on M1 ALT/AZ
Nikon Prostaff 65mm spotter on Trekpod
Konusvue 20x80 binos/Peterson PipeMount


"Newt Gingrich is what stupid people think smart people sound like."
-The Great Paul Krugman

Evolution is both fact and theory. Creationism is neither. -Anonymous


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 01, 2008 6:20 am 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
I'll throw in pictures when I have time.

So far, I've discovered that the cell was not stiff enough after all. I'm using styrofoam to thicken it in the right places and will be fiberglassing that probably next week.

I've finished the UTA, the secondary holder, the altitude bearings, and one of two sets of cross-members. The foam/fiberglass combination is very strong and stiff, and I'm happy with that part of it. It's extremely time-consuming to lay up, though, and the finished pieces are more prone to chipping and cracking on impact than dense wood would be. I'm almost done with the upper and lower truss brackets; they're plywood but I'm using a layer of fiberglass over them to prevent splitting. I'm also making knobbed bolts out of casting resin to hold the assembly together.

I need to finish the lower cross members, stiffen the mirror cell, construct the mount, assemble, test and collimate the whole thing. I've got three weeks.

It's going to be close!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 01, 2008 8:58 am 
Offline
Site Admin
User avatar

Joined: Tue Feb 12, 2008 4:58 pm
Posts: 12616
Location: Off Grid in Paradise... Mag 7 skies
Thanks for the update, Dave. Man, 3 weeks- you'd better get busy! Looking forward to seeing pics..

_________________
-Erik Wilcox
Homebuilt 16" Truss Dob
8" Antares f/5 Newt
SV 80mm ED Nighthawk NG on M1 ALT/AZ
Nikon Prostaff 65mm spotter on Trekpod
Konusvue 20x80 binos/Peterson PipeMount


"Newt Gingrich is what stupid people think smart people sound like."
-The Great Paul Krugman

Evolution is both fact and theory. Creationism is neither. -Anonymous


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 01, 2008 10:26 am 
Offline
quasar
User avatar

Joined: Wed Feb 13, 2008 9:16 pm
Posts: 5125
Location: Bay Area, California
Very cool project. I'm not sure wood and fiberglass is enough to support 50 lbs. (or whatever) of mirror. You may end up taking your model to a welder ;)

_________________
Ah, but I was so much older then.
I'm younger than that now
Bob Dylan

Image
49.6 mpg avg over 38,000 miles. 177% of '08 EPA
Best flat drive 94.5 mpg for 9.8 mi
Best tank 1033 km (642 mi) on 10.56 gal = 60.8 mpg


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 01, 2008 11:48 am 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
Darrell, the stiffness of fiberglass part depends almost exclusively on the cross section of the piece, not the material the core is made of. The wood and fiberglass was 3/4" thick on the base of the cell, which might be enough to support the 26 lb mirror if it didn't have the cantilever of the three support arms projecting beyond the mirror edge.

What I need to do is build up the cross section, which I'm doing with pieces of styrofoam. Once I've got the form reshaped, a few more layers of fiberglass over that should stiffen it up nicely.

I've already subjected the OTA rings, cross members and altitude bearings to a lot of force, and they haven't budged.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 01, 2008 12:13 pm 
Offline
Super Nova
User avatar

Joined: Sat Feb 16, 2008 12:06 pm
Posts: 1083
Location: Amargosa Valley, NV
OK, here are some progress photos, although strictly speaking they're not about the mirror cell.

First is the secondary holder -- the assembly is PVC and wood, and will support a wire spider.

Parts:
Image

Assembled:
Image

Next is the UTA after the first round of painting. I'm not happy with the boundary between the black and red, and Elaine has promised to try to work her magic on it:

Image

Here is one of the altitude bearings while the epoxy was curing on its final fiberglass layer. Notice that it's symmetrical rather than having the usual dobsonian rotational offset. There are wooden blocks embedded at strategic points that provide anchors for the truss brackets:
Image

And here are the wooden brackets for the upper truss assemblies. The lower brackets have only a single slot. These have since been fiberglassed and painted.
Image

So, I've made progress, but I still have a ways to go.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group